Search
View: 1261|Reply: 1
Print Prev. thread Next thread

Garage Floor Painting

[ Promote this link! ]

1763

!threads!

0

Friends

6021

Money

member

Rank: 1

Jump to specified page
1#
Post time 2019-8-15 15:11:18 |Show the author posts only |Descending
spills make the floor unsightly and hard to clean. Garage floor painting with the right type of paint will make cleaning spills much easier because these paints are made to withstand the grease and oils spilled in your garage. Before you apply any paint though, the floor must be completely clean. You will likely have to purchase some type of cleaner that will remove all the stains and dirt from the floor. In addition, the floor must be completely dry before applying any paint. When cleaning your garage floor, it is very important to wear the proper protective clothing such as gloves and safety glasses. There are concrete floor cleaners available at most hardware stores or do it yourself centers. If you cannot find a commercial concrete cleaner then a mixture of three parts water to one part bleach may work. Apply the cleaner to the stains and after a few minutes, scrub with a stiff bristled  " high flame roof garden pavilion kit prices , composite pontoon decking under a metal roofing "

0

!threads!

0

Friends

4

Money

member

Rank: 1

2#
Post time 2021-11-23 05:46:20 |Show the author posts only
We tried to paint the floor in our garage, but it didn't work. The floor often got dirty with street dirt, swamp, or dust from car wheels, and we sometimes spilled gasoline and motor oil. All this made the floor look like something disgusting, and there was also an unpleasant musty smell. No chemicals helped us. Eventually, we decided to call the guys from https://cleansolutionllc.com/commercial-floor-cleaning. I don't know about cleaning methods and have no idea what they did, but I haven't smelled mold anymore. Of course, we still spill oil, but it's cleaned with the products they advised us.
You have to log in before you can reply Login | 立即注册

Heyshell

2024-5-6 08:59 GMT+8 , Processed in 0.040102 second(s), 19 queries .

Powered by Discuz! X2.5

© 2001-2012 Comsenz Inc.

To Top