floor should also have been stored

liuer

battens. There are different ways of completing the task with this method, including secret nailing where a nail gun is used to drive nails through the side of the tongue at angles of between 33 degrees and 45 degrees. Gluing. This method is suitable for fitting flooring on a solid sub floor. Always ensure that the sub floor is completely dry and free of dirt and  " cheap patio floor tile photos , unlevel patio cheap solution "solid particles. Install a continuous Damp Proof Membrane when using this method to ensure the floor remains dry. Installation tips. The key to successful installation is proper planning, preparation and execution. Ensure the relative humidity in the room where the floor is to be installed or even stored is between 50% and 65%. Too much humidity can damage the flooring and give poor results. Also, check that the floor you get is kiln dried to the appropriate moisture content level: ideally 10%. The floor should also have been stored in temperature controlled conditions prior to your collection. This ensures the floor will require little if any acclimatisation before lying. Finally, if you are installing the floor  " cheap patio decorating ideas , low cost veranda railing "