leds and lack of spark when testing

brianbennett863

Greetings from France again
After my previous post where I ran dumb coils, I replaced them with audi-style intelligent coils
The pinout I made is:
1: +12V
2: earth
3:+5V from speeduino ignition
4: ground
exposure time is 3 ms, spark time is 1 ms, exposure time is 4 ms when cranking,
low-response LEDs are flashing now when I test them, but they are less bright than injectors. Normal?
Also, I don't have a spark at all when I do a 50% output test (one coil comes out of the engine with the spark plug connected). Normal? I haven't tried to crank and see what happens yet, but I thought I could get a spark while testing them..?
What do you think about it?
Thank you very much!

edwardbarnett

You are not alone in your problem, as I am also constantly faced with failures..

JasmineHart

After much thought, I got off my ass and decided to install some interior (legroom) lights and some grille lights. Many motorists want to replace the usual incandescent bulbs of the car with LEDs. Their advantage is determined by durability, low current consumption, high light output and lack of heating. I recently ordered lamps for myself at https://www.amazon.com/Flagpole- ... Vont/dp/B00YBDA7DC/ and I really like the way it looks, and I really liked the quality!